Dear Redbear Team,
I just started working on the Wifi Micro following these instructions ... http://www.seeedstudio.com/document/pdf/WiFi%20Micro%20GettingStartedGuide.pdf
I managed to upload the Blink example and the LED flashes correctly but the following log is printed during the upload ....
How could I fix this?
Sketch uses 2,936 bytes (1%) of program storage space. Maximum is 262,144 bytes.
Can't open device
Getting storage list
Bootloader Version: 4
Silicon version ES1.32 or higher
Bootloader version is 2, 1, 4, 0
It's a CC3200 device: PG1.33 or higher
Switch UART pinmux to APPS
--- Connection failed trying to reconnect... (1 attempt)
Switch to NWP bootloader complete
Load common boot command for PG1.33 or higher
Bootloader version is 2, 0, 4, 0
BlockSize is 4096, number of blocks is 16
erasing 13 blocks starting from 0
erasing file "/sys/mcuimg.bin"
deleting file "/sys/mcuimg.bin"
erase file completed
Downloading file "/sys/mcuimg.bin" with size 2936
DEBUG cc3200prog.c:2667: write failed
DEBUG cc3200prog.c:2673: write failed
DEBUG cc3200prog.c:2679: write failed
DEBUG cc3200prog.c:2685: write failed