Problems between Arduino and BLE Nano v2


#1

Hi,

When I upload the program it appears this:
Open On-Chip Debugger 0.10.0-dev-00254-g696fc0a (2016-04-10-10:13)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
debug_level: 1
adapter speed: 10000 kHz
cortex_m reset_config sysresetreq
nrf52.cpu: target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x000006d0 msp: 0x000007c0
erased address 0x0007f000 (length 4096) in 0.014872s (268.962 KiB/s)
Warn : using fast async flash loader. This is currently supported
Warn : only with ST-Link and CMSIS-DAP. If you have issues, add
Warn : “set WORKAREASIZE 0” before sourcing nrf51.cfg to disable it
wrote 4 bytes to 0x0007f000 in 0.640015s (0.006 KiB/s)
Warn : using fast async flash loader. This is currently supported
Warn : only with ST-Link and CMSIS-DAP. If you have issues, add
Warn : “set WORKAREASIZE 0” before sourcing nrf51.cfg to disable it
wrote 4 bytes to 0x0007f008 in 0.669921s (0.006 KiB/s)
nrf52.cpu: target state: halted
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x000006d0 msp: 0x000007c0
** Programming Started **
auto erase enabled
Warn : using fast async flash loader. This is currently supported
Warn : only with ST-Link and CMSIS-DAP. If you have issues, add
Warn : “set WORKAREASIZE 0” before sourcing nrf51.cfg to disable it
wrote 20480 bytes from file C:\Users\KARIMD~1\AppData\Local\Temp\arduino_build_942232/Blink2.ino.bin in 1.257942s (15.899 KiB/s)
** Programming Finished **
** Verify Started **
verified 18020 bytes in 0.255021s (69.005 KiB/s)
** Verified OK **
** Resetting Target **
shutdown command invoked

What do i do? I follow all the steps in RedBear guide.


#2

Hi @karimdasuki,

Everything from the console looks good. Do you have any other questions?


#3

No, it’s ok. I’m now y Zerynth with python