Uploading failed


#1

Dear Redbear Team,
I already created two topics yesterday regarding the problems I had with MK20 and WifiMicro.
I just tried to upload code with the “FTDI Friend” by Adafruit but I am getting the following error …
I connected (GND, CTS, VCC, Tx, Rx, RTS) of the FDTI to the corresponding pins of the WifiMicro (GND, NRST, VDD, Rx, Tx, D13).
I have also installed the add-on package … https://github.com/RedBearLab/RBL_CC3200/tree/master/Energia/hardware/cc3200
Any help will be really appreciated!
Best,
George

Energia: 1.6.10E18 (Windows 8.1), Board: “RedBearLab WiFi Micro w/ CC3200 (80MHz)”

Sketch uses 22,576 bytes (8%) of program storage space. Maximum is 262,144 bytes.
Opening COM7
Can’t open device
Triggering bootloader…
Trigger bootloader failed. Retrying… (1 attempt)
Trigger bootloader failed. Retrying… (2 attempt)
Trigger bootloader failed. Retrying… (3 attempt)
Trigger bootloader failed after 3 attempts
Failed to trigger bootloader
An error occurred while uploading the sketch

This report would have more information with
“Show verbose output during compilation”
option enabled in File -> Preferences.